Sharkoon T5 Economy Manuel d'utilisateur

1Manual

T5 VALUE106. Installation of a HDD1.AttachthemountingrailstotheHDDfrombothsides(g.7).  MountingrailsforHDDsg.72. Slide the HDD

T5 VALUE11Notes:A maximum of five 3.5" HDDs may be installed into the HDD cage. Further HDDs may be installed to the mounting bays for 5.25"

T5 VALUE12 g.11g.12 (Carefullytakeoutanoptionallypresentmetalbezelcoveringthe3.5"drivebaybyusinga  gripp

T5 VALUE138. Installation of a 3.5" device(1.Removethecase’sfrontpanelbygentlydraggingittowardsyou.)2. Dismantle the 5.25" front

T5 VALUE145. Connect the 3.5" device to the power supply and the mainboard.6.Screwthe5.25"bezelwith3.5"openingintothefront

T5 VALUE152.Insert the add-on card into the mainboard’s respective slot and x it to the case by  re-attachingthexationscrew(

T5 VALUE1611. Using the mounting frame for 2.5" and 3.5" HDDs/SSDs1. Place the HDD/SSD into the mounting frame. 2.5" HDD/SSD

T5 VALUE17Legal disclaimer:AsacontinuingpolicyofproductimprovementatSHARKOON,thedesignandspecicationsaresubjecttochangewithoutprior

T5 VALUE2Content1. Features 32. Package content 33. The case at a glance 54. Installation of a mainboard 75. Installation of a PSU 96. Ins

T5 VALUE31. Features • ATXcase • 5x5.25"drivebays(external) • 5x3.5"baysforHDDs(internal) • FrontI/O:2xUSB3.0,2xUSB2.

T5 VALUE4MountingrailsforHDDs QuickfastenersforODDsMounting frame for 2.5"and 3.5" HDDs/SSDs Mountinganglesfor3.5"device

T5 VALUE53. The case at a glance Front view A – Front I/OB– 5.25"drivebaysC– Airinlet,covered:pre-installed120mmLEDfan(blue

T5 VALUE6Sideview(opened/left) A – Drive bays for 5.25" devicesB– Mainboardmountingpanelwith: a – Installation opening for CPU

T5 VALUE74. Installation of a mainboard1. Open the case by loosening the thumb screws on the case’s back side and removing the left  sidepanel.La

T5 VALUE83. Remove the mainboard and screw the stand-offs into the respective drillings of the  mountingpanel(g.3).(Stand-offs)  g.34.P

T5 VALUE96. Plug the connectors of the case’s front bezel to the respective connectors of the mainboard  (alsorefertoyourmainboard’smanualfor